Packed Thermic Lance based on 3/8 Water Pipe 1/2 length (1.5m) - Pack of 10 pcs

Please note that a "3/8" packed lance has an outside diameter of  about 16.6mm.

Typical packed thermic lance for cutting and boring holes in all sorts of substrates, being a "packed" thermic lance means that the lance has extra fuel rods which makes the thermic lance ideal for work with concrete, brick, granite as well as metals such as aluminium, copper and stainless steels et cetera.

The lance has a "swan neck kink" at the torch end to ensure the fuel rods packing the thermic lance do not get blown out by the force of the oxygen, therefore make sure the lance is loaded in the lance holder the correct way round before igniting the lance.

These half length (1,5m) 3/8 packed thermic lances have a screwed end which allows a simple lance holder to  be used or a collet type lance holder.

Being a "packed" lance the lancing tube is filled (packed) with mild steel fuel rods along its length approximately 3mm diameter .

Item number GA0997 is for a single item so invoice will show 10 pcs.
These thermic lances are only sold in bundles of 10 pcs.
Due to the length and weight additional carriage costs often apply