#2P - Multi-Flame Hooked Nozzle to Get Round Pipes - Oxy / Propane - Suitable fro Pipe Diameters of 25-40mm Size 2P
Please be aware this is an Oxy / Propane Nozzle
Braziing & Silver soldering nozzle specifically designed for those awkward to access areas where you may need to join pipes such as close to a bulkhead / panel or wall. The middle size hook nozzle has 9 flames designed to suit pipes from 25 to 40mm diameter.
For brazing other diameter pipes please see the smaller and larger sizes in the range as the nozzles focus the heat correctly for the smaller and larger pipe sizes and have been designed for the correct heat spread required for the pipe sizes required.
This middle size hook brazing nozzle will screw directly into the Lt. Wt. mixer allowing it to be used with Lt. Wt. shank, the brazing nozzle has 9 heating flames which are focused on the same point towards the centre ensuring the tube / pipes to be joined may be heated from all sides, including the back whcih you cannot always get to. This hooked multiple outlet brazing nozzle is ideal for heating and ventilation engineers.
There are also oxy / acetylene versions available.
The oxy / propane hook brazing nozzles do not have the flow "problem" associated with the acetylene version - simply because many heating and ventilation engineers use small portable fuel gas cylinders. The flow rate for the oxy propane version does need to be set correctly and with a sufficiently high enough flow otherwise the nozzle will extinguish with a bang!
Set the flame to a high enough flow so that one or two cones "dance" on an off the burner tube when the nozzle is burning without a pipe in place.
This nozzle has been designed to work with pipe diameters of 25 to 40mm