160A DC TIG Welder - Full functioning digital welder
This welder is a proper DC Pulsed TIG welder rather than one of the low cost versions of a welder where by you have just a couple of switches being a glorified MMA welder.
Each machine comes complete with a TIG welding torch (26 type), earth lead, flow tube regulator for more precise gas control, argon hose to connect to the machine and of course a set of decent English instructions to help make life more easy setting it up.
Features at a Glance
TIG/MMA multi process IGBT technology
Pulse function
Clear, vibrant LCD display
Mono control point
Compact, robust & lightweight
Delivers a stable, consistent, smooth welding arc DC TIG mode functions
Main welding current
Pre & post gas flow
2 & 4 stroke switch latching
Start and final current (4 stroke latching)
Pulse current control
Arc start ignition type
Gas purge
MMA mode functions
Main welding current
Hot start
Arc force adjustment
Machine Setting Parameters
|
Low |
High |
Units |
Gas Pre-flow |
0 |
1 |
Seconds |
Starting Current |
5 |
160 |
Amps |
Slope Up |
0 |
5 |
Seconds |
Welding Current |
5 |
160 |
Amps |
Base Current (Pulse) |
5 |
160 |
Amps |
Pulse Frequency |
0.5 |
100 |
Hz |
Slope Down |
0 |
5 |
Seconds |
Crater Current |
5 |
160 |
Amps |
Post Flow |
0.1 |
10 |
Seconds |
Pulse Duty |
5 |
100 |
Percent (%) |
Pulse Selection |
Off |
On |
|
Arc Starting Current |
1 |
10 |
|
Arc Force |
1 |
10 |
|
Machine Specification Parameters
|
TIG |
MMA |
Power Voltage (V) |
1Ph 230V +/- 10% |
Frequency (Hz) |
50/60 |
Rated input current (A) |
16.4 |
26.4 |
Rated input current (kw) |
2.9 |
4.7 |
Rated current range |
5-160 |
5-160 |
Power factor |
0.80 |
No load voltage |
56 |
Duty cycle (%) |
160 Amps @ 40% (100 Amps @ 100%) |
Efficiency |
>80% |
Protection class |
IP23S |
Insulation class |
F |
Weight (kg) |
7 |
Dimensions (mm) |
400 x 130 x 240 |