Jasic TIG 200 Pulsed TIG Dual Voltage - JT-200P-PFC

This machine has now been discontinued and replaced with the EVO version. Please see the related machine below.

Jasic JT-200P-PFC is the replacement machine for the JT-200PDV. This opens the voltage range right up so rather than being 110 or 240 it runs right from 95 volts to 265 volts. 
The Jasic TIG 200 PFC is a fully programmable DC TIG welder designed for the professional welder (or anyone who appreciates quality) where there is a probability of working on site. This welder will automatically detect the power source so whatever plug it is running of the machine will adjust for 110v or 230v, no need for you to select anything in particular and it will deal with under or over voltage too. 

This TIG welder runs on an IGBT inverter (like all Jasic inverters) which makes it generator friendly. Because of the superior build quality you also get a 2 year standard warranty and because you are buying it from Noz-alls, we register the warranty for you which increases it to a market leading 5 years. 

Settings wise you can program in pre gas, slope up, peak and base current, pulse percentage and frequency, slope down and post gas. 

Key Features
Dual Voltage - automatically detects the power in and adjusts to what you need.
HF start - longer tungsten life and easier arc striking. 
MMA, TIG switch - two machines in one! 
Down slope and post flow - no TIG crator at the end of your weld. 
IGBT inverter - adapts to voltage change, generator friendly.
Single PCB design - improved reliability.

Technical Information

	230V AC TIG	115V AC TIG	230V AC MMA	115V AC MMA
Input Current Ieff	14.2	27.7	14.2	27.7
Current Range	10 - 200 Amps	10 - 160 Amps	10 - 180 Amps	10 - 125 Amps
Duty Cycle @ 40°C	30% @ 200 Amps	60% @ 160 Amps	25% @ 180 Amps	60% @ 125 Amps
No Load Voltage	65		65
Efficiency	85%
Power Factor	0.99
Insulation Class	IP21 S
Dimensions (mm)	420 x 135 x 277
Weight	7.5 kg