MiniFil High Vacuum Smoke Extraction Filter Unit
Give Noz-Alls a call today for our best price 01242 681052.
High vacuum filter unit for on-torch extraction with contamination free filter change
Please call for lead times on this Fume extractor. Tel. 01242 681052
The compact MiniFil high-vacuum extraction unit for medium amounts of smoke and dust ensures high mobility for frequently changing workplaces with on torch extraction or extraction nozzles. The integrated automatic start/stop and the contamination-free filter change make the MiniFil especially simple and safe to use.
The Kemper MiniFil is also suitable for high-alloy steel and is suitable for medium levels of smoke and dust
- Torch extraction
- Energy-saving operation due to integrated start/stop function
- Increased safety with safe filter change
- Ideal for changing workplaces due to its low weight and optional trolley
- Optimal adjustment to the welding process with stepless speed control
- Filter monitoring
- Stepless speed control
- Safe Change Filter
- Start/Stop function
- Spark separator
Options available:-
- Trolley
- Various hose lengths
- Various extraction nozzles
Please see fume accessories section and related items below.
Technical Data
Filter
Filter stages 3
Filter method Disposable filter
Filter surface ca. 12 m²
Type of filter Safe Change Filter
Filter material Non-woven polyester
Filter efficiency > 99 %
Filter class H13
Additional filters Cyclone pre-filter
Additional filters Pre-filter (aluminum)
Basic data
Extraction capacity 150 m³/h
Dimensions (w x d x h) 425 x 365 x 790 mm
Weight 20 kg
Motor power 2 kW
Power supply 1 x 230 V / 50 Hz
Rated current 11 A
Noise level 74 dB(A)
Additional information
IFA-Certification W3-Approved
Fan type Suction turbine
Our quick video clip shows welding with the Holch torch extraction "on" followed by the Kemper MiniFil vacuum having been turned "off" so you see the normal fume as a direct comparison, then the Vacuum turned back "on" the close up didn't work as my stills camera doesn't refocus easily. We will reshoot later. The Headux 250C Welder was operating at 230 Amps welding with 1,0mm mild steel ESAB G3Si MIG wire with the wire speed at 16,5 m/ min.
The Holch MIG torch is the MHS350 air cooled version which has the same front end as the water cooled MHS 450.
.png)
.jpg)
