WP17 Flexible Neck TIG Torch with Valve, Switch and Cover - Binzel Original SR17
- Air Cooled
- 35% Duty at;
- Suited for tungstens up to 2.4mm
The WP17 TIG torch is normally the torch of choice for lower powered TIG machines as they are slightly less bulky than the bigger brother WP26. Consumables are readily available from us at WeldingDirect and you can view the range by clicking on the related products below.
This WP17 type torch has a flexible neck and built in valve. It is ideal for working on TIG welders with scratch or lift start (without HF) which are likely to not have a gas solenoid fitted while you have difficult positions for yourself or your torch to get into. The switch and cover allows for the torch to be connected to an aphenol plug which can then be fitted to the machine for switching the power on/off. If you have a foot pedal and would like to use this TIG torch without a switch then please see the related product below without '-SC'.
You have a choice of either 4m or 8m (12.5ft or 25ft) lead length and all Binzel torches come complete with a set of consumables - all you have to do is fit your own tungsten electrode.
As mentioned previously, this torch is a Binzel Original and is without doubt an excellent quality piece that will serve you longer than others.
.png)
.jpg)
