Cutting Nozzle PNME-9 Oxy / Propane Extended Length 88mm
PNME-9 Hand cutting nozzle - The cutting equipment being used is only as good as the nozzle. When the nozzle has not been made correctly then the process becomes less efficient / safe.
Our PNME-9 have been produced to our own engineering drawings to provide you with the highest quality PNMEs available. Our nozzles have been designed to last and although they may be slightly more expensive than cheap copies you will ultimately profit from a good quality nozzle through not having to buy replacement tips as often plus benefitting from greater efficiency during cutting as well as a reduction in secondary cutting operations.
Usually buy PNME-9? Try our PNME-18 in the related products section. Once you do you will soon not want to switch back.
With a seat type designed to fit our NM250 torches and an overall length of 86mm this nozzle is ideal as a general purpose hand cutting nozzle if you wish to cut with Oxy / Propane.
|
Nozzle
Size
(bar)
|
Nozzle
Size
(mm) |
Cutting
Thickness
(mm)
|
Acetylene
Pressure
(bar)
|
Oxygen
Pressure
(bar)
|
| 1/32 |
0.8 |
3-6 |
0.3 |
1.5-2.0 |
| 3/64 |
1.2 |
5-12 |
0.3 |
2.0-2.5 |
| 1/16 |
1.6 |
10-75 |
0.5 |
2.5-4.0 |
| 5/64 |
2.0 |
70-100 |
0.6 |
3.0-3.5 |
| 3/32 |
2.4 |
90-150 |
0.6 |
3.0-3.5 |
| 7/64 |
2.8 |
140-200 |
0.7 |
4.0-4.5 |
| 1/8 |
3.2 |
190-300 |
0.7 |
5.0-6.0 |
.png)
.jpg)
