Micro Bore Hose Set 3mm bore G1/4 Fittings
Micro Bore Hose Set (LM) x 3mm bore G1/4 x G1/4 HCV
ITEM CODE: GC0199+GC0200
£49.38
(Inc £59.26)
Micro Bore Welding Hose Set ?m Long - Fitted with G1/4 Nut and G1/4 HCV.
Order now for Friday delivery.
Earn 49 points when you buy this item.
Set of High quality micro bore hose suitable for all oxy / fuel applications that require a small or micro flow.

Select hose length required.

These micro bore "welding hoses" have been manufactured in the UK and produced with due regard for BS EN 3821 even though these hoses fall outside the scope of the standard due to their small size.

These hoses have been manufactured in blue for use with oxygen and orange for use with fuel gases.  Generally red acetylene hose cannot be used with LP gases whereas orange LP gas hose may be used safely with acetylene and this was the reason why Noz-Alls decided to manufacture in Blue & Orange.

The micro bore hoses are super flexible and make them ideal for use with the traditional Model "O" lead buring blowpipe or the even smaller American micro torch known as the Artorch or Little Torch. 
The FN shank may also be successfully operated with the micro bore hoses.

These hoses are supplied with G1/4 connections at each end. One end is a standard nut and nipple the other is fitted with a HCV (Hose Check Valve)

Micro Bore Hose Length -  Micro bore hoses are typically used with the smallest of nozzle sizes on small torches, therefore please note the following which is very important for your safety and that of your equipment.
Lack of purging or incorrect purging is the major cause of flashbacks in gas equipment this is compounded by the use of small nozzles which makes purging more difficult to achieve.
Therefore the use of long lengths of micro bore hose is not recommended for everyday use, from a safety point of view, where access is required to reach a job, lifting and positioning cylinders would present a safety risk then it is good practice to fit long hoses on a temporary basis as the overall risk to safety is reduced.  
When long hoses are fitted remember that the hoses will require purging correctly,  Lead "burning" using the Model "O" blowpipe / torch or the Smith type Little Torch the nozzle should always be removed from the torch to purge the gases. 
The fuel gas & the oxygen must be purged from each hose prior to lighting up.  Due to the small orifice size in the Model "O" nozzles (even smaller in the Smith Little Torch nozzles) if the nozzle remains in the torch the purging time would be very extended as an example the Model "O" #1 oxy / acetylene nozzle would take 3 minutes of purging per hose to clear 3 metres of micro bore hose based on moving 2x volume of hose If you were using standard 6.3mm bore x 5m hose set this would require 18 minutes of purging per hose!
Therefore you may see how important it is to remove the nozzle to purge correctly - with the nozzle removed the hoses may be purged in a matter of a few seconds.
Hose Length
Microbore
Hose Bore
3mm
Gas Type
Both

Finance - PayPal Credit

Login on PayPal at the checkout process; 
Click one of these two boxes. Simple! 


Spending over £99 on our website? If so, PayPal Credit is for you. It is essentially an interest free credit card without the card. 
You can make your purchase and pay it back over 4 months with 0% interest. Obviously if you take longer than 4 months to pay back there is interest associated to PayPal Credit, it's how they make their money. If however you pay the purchase off within the interest free time frame you will not pay anthing more than the purchase cost. 

To improve your chances of being eligible for PayPal Credit you must; 
1. Be aged over 18
2. Not be recently bankrupted 
3. Have an annual income over £7500 
4. Have a good credit history 

If you are to use PayPal credit then we can only ship to the PayPal verified address. We will not be able to ship to another location. 

Any use of PayPal Credit will lead to a contract between yourself and PayPal.
Set of High quality micro bore hose suitable for all oxy / fuel applications that require a small or micro flow.

Select hose length required.

These micro bore "welding hoses" have been manufactured in the UK and produced with due regard for BS EN 3821 even though these hoses fall outside the scope of the standard due to their small size.

These hoses have been manufactured in blue for use with oxygen and orange for use with fuel gases.  Generally red acetylene hose cannot be used with LP gases whereas orange LP gas hose may be used safely with acetylene and this was the reason why Noz-Alls decided to manufacture in Blue & Orange.

The micro bore hoses are super flexible and make them ideal for use with the traditional Model "O" lead buring blowpipe or the even smaller American micro torch known as the Artorch or Little Torch. 
The FN shank may also be successfully operated with the micro bore hoses.

These hoses are supplied with G1/4 connections at each end. One end is a standard nut and nipple the other is fitted with a HCV (Hose Check Valve)

Micro Bore Hose Length -  Micro bore hoses are typically used with the smallest of nozzle sizes on small torches, therefore please note the following which is very important for your safety and that of your equipment.
Lack of purging or incorrect purging is the major cause of flashbacks in gas equipment this is compounded by the use of small nozzles which makes purging more difficult to achieve.
Therefore the use of long lengths of micro bore hose is not recommended for everyday use, from a safety point of view, where access is required to reach a job, lifting and positioning cylinders would present a safety risk then it is good practice to fit long hoses on a temporary basis as the overall risk to safety is reduced.  
When long hoses are fitted remember that the hoses will require purging correctly,  Lead "burning" using the Model "O" blowpipe / torch or the Smith type Little Torch the nozzle should always be removed from the torch to purge the gases. 
The fuel gas & the oxygen must be purged from each hose prior to lighting up.  Due to the small orifice size in the Model "O" nozzles (even smaller in the Smith Little Torch nozzles) if the nozzle remains in the torch the purging time would be very extended as an example the Model "O" #1 oxy / acetylene nozzle would take 3 minutes of purging per hose to clear 3 metres of micro bore hose based on moving 2x volume of hose If you were using standard 6.3mm bore x 5m hose set this would require 18 minutes of purging per hose!
Therefore you may see how important it is to remove the nozzle to purge correctly - with the nozzle removed the hoses may be purged in a matter of a few seconds.
Hose Length
Microbore
Hose Bore
3mm
Gas Type
Both

Finance - PayPal Credit

Login on PayPal at the checkout process; 
Click one of these two boxes. Simple! 


Spending over £99 on our website? If so, PayPal Credit is for you. It is essentially an interest free credit card without the card. 
You can make your purchase and pay it back over 4 months with 0% interest. Obviously if you take longer than 4 months to pay back there is interest associated to PayPal Credit, it's how they make their money. If however you pay the purchase off within the interest free time frame you will not pay anthing more than the purchase cost. 

To improve your chances of being eligible for PayPal Credit you must; 
1. Be aged over 18
2. Not be recently bankrupted 
3. Have an annual income over £7500 
4. Have a good credit history 

If you are to use PayPal credit then we can only ship to the PayPal verified address. We will not be able to ship to another location. 

Any use of PayPal Credit will lead to a contract between yourself and PayPal.
Related Products
Oxygen Safe Leak Detector Spray
Oxygen Safe Leak Detector Spray
Suitable for use with oxygen pipe line as well as fuel and inert hoses and connections.
£8.42
(Inc £10.10)
Light weight handle
FN Light Weight Aluminium Shank Torch
Compact & Light Weight Shank - Aircraft Handle
£22.60 £51.07
(Inc £27.12)
Customer Reviews (0)