ANMS or ANM -6 Cutting Nozzle - Oxy/Acetylene
ITEM CODE: GB0001
£4.48 £10.86 save:£6.38 ✔
(Inc £5.38)
High Quality British DesignSolid copper ANM-6 cutting nozzle with 6 pre-heat flames.
Order now for Monday delivery.
Earn 4 points when you buy this item.

ANMS or ANM-6 Cutting Nozzle - All Sizes Available
Standard British style nozzle mix cutting nozzles 75mm long with the larger barrel diameter.  Our ANM-6 cutting nozzles exhibit good backfire resistance.  Each of our nozzles will be capable of turning down to 50% flow and remain stable in use.  

Please note that our ANM-6 cutting nozzles have different pre-heat flows for each nozzle size to ensure the heat output is correct for the thickness being cut. 
The size 3/32" is the largest that may be used on s single large industrial Acetylene cylinder due to the flow rate of acetylene.
ANM, A-NM, ANMS and ANM-6 should not be used with small portable acetylene cylinders because they use too much acetylene, instead use the AFN miniature cutting nozzle and Light Weight Shank & Cutting Attachment
Noz-Alls
Noz-Alls ANM-6 (Acetylene Nozzle Mix - 6 pre-heat cones) cutting nozzles have the traditional large tip diameter for maximum heat dissipation. These ANM cutting nozzles are easy to work with because they exhibit good resistance to backfire combined with focused pre-heat flame cones which are essential qualities required
for initiating and maintaining the cutting process thereby giving you the confidence to work quickly and efficiently without experiencing operating problems.
Noz-Alls
Produced to Noz-Alls own drawings we know that our ANM nozzles work safely and effectively giving you a safer and longer lasting nozzle compared to cheap versions that you can find in the market. Ensure that you complete your kit with something that works.  Our ANM-6 cutting nozzles have the original larger barrel diameter which is 15.4 - 15.6 mm plus our nozzle length is the original 75mm which helps provides the optimum performance.

As mentioned above, for your safety and that of those around you it is important that you do not use ANM-6 cutting nozzles on small / medium size acetylene cylinders (PortaPak / "J" size) this is because the ANM-6 nozzle even the smallest size 1/32" will draw off too much acetylene therefore it is important to use only the AFN / ASFN cutting nozzle range with small and medium size DA cylinders.

From regulators, flash back arrestors, hoses, quick connectors and torches, we have everything you could possibly need to go with your nozzles. Please feel free to browse in the related products section as well as the rest of our website.

The ANM range cuts from 3mm to 300mm. Please see our size information table below.

 

Nozzle

Size

(Inch)

Nozzle

Size

(mm)

Cutting

Thickness

(mm)

Acetylene

Pressure

(bar)

Oxygen

Pressure

(bar)

1/32 0.8 3-6 0.3 1.5
3/64 1.2 5-12 0.35 1.8-2.2
1/16 1.6 10-75 0.4 2.6-3.5
5/64 2.0 70-100 0.4 3.1
3/32 2.4 90-150 0.4 2.8-3.2
7/64 2.8 140-200 0.45 3.1-3.7
1/8 3.2 190-300 0.45 4.5-6.2


ANME's also cut the same range but offer a longer tip with increased backfire resistance. We also offer an ANME in a long taper version to help with cutting vision.
To cut more than 300mm please see our 'Heavy Duty ANME' in the related products
section.

0700143016, 0700143017, 0700143018, 0700143019, 0700143020, 0700143022

Why You Need to Pay the Right Price
When you pick up an ANM-6 in your hand what do you see, is it just a lump of copper with 20 holes in it with 10 external diameters and 3 tapers? 
 
Well typically that is what you see when you examine an ANM no matter whose ANM or ANME cutting nozzle you have purchased.
 
Very few people have sufficient experience to understand nozzle design and that although the external dimensions are important for most of those dimensions it is the internal sizes that dictate nozzle performance and those you cannot see.
 
Have you ever considered what makes the ANM-6 cutting nozzle function and operate correctly?  Well it all comes down to the internal design and manufacturing process, that is what determines just how the nozzle performs it is the arrangement of the internal holes and their sizes that makes all the difference to each nozzle.
 
Inside each ANM-6 there are 33 different diameter holes 6 individual mixing systems each of 5 different diameters and those hole diameters each interacting with the other to help provide the correct flame characteristics.
The design is not particularly difficult to achieve when made correctly however it is important for the design to be correct.
 
How do companies make cheap ANM nozzles, well to cut the cost of the nozzle – they simply take out some of the internal operations and hole diameters.
Due to the fact the changes are made internally you cannot see the cheapening of the nozzle.
To the untrained eye removing operations which may seem to be superfluous result in an inferior nozzle with poor performance when it counts. 
 
Less processing means less operations and less cost in manufacturing with quicker processing resulting in a cheap nozzle.
 
Externally the result looks the same and you would never know as the inside goes unnoticed until the nozzle doesn’t work correctly.­­­­­­
 

Finance - PayPal Credit

Login on PayPal at the checkout process; 
Click one of these two boxes. Simple! 


Spending over £99 on our website? If so, PayPal Credit is for you. It is essentially an interest free credit card without the card. 
You can make your purchase and pay it back over 4 months with 0% interest. Obviously if you take longer than 4 months to pay back there is interest associated to PayPal Credit, it's how they make their money. If however you pay the purchase off within the interest free time frame you will not pay anthing more than the purchase cost. 

To improve your chances of being eligible for PayPal Credit you must; 
1. Be aged over 18
2. Not be recently bankrupted 
3. Have an annual income over £7500 
4. Have a good credit history 

If you are to use PayPal credit then we can only ship to the PayPal verified address. We will not be able to ship to another location. 

Any use of PayPal Credit will lead to a contract between yourself and PayPal.

ANMS or ANM-6 Cutting Nozzle - All Sizes Available
Standard British style nozzle mix cutting nozzles 75mm long with the larger barrel diameter.  Our ANM-6 cutting nozzles exhibit good backfire resistance.  Each of our nozzles will be capable of turning down to 50% flow and remain stable in use.  

Please note that our ANM-6 cutting nozzles have different pre-heat flows for each nozzle size to ensure the heat output is correct for the thickness being cut. 
The size 3/32" is the largest that may be used on s single large industrial Acetylene cylinder due to the flow rate of acetylene.
ANM, A-NM, ANMS and ANM-6 should not be used with small portable acetylene cylinders because they use too much acetylene, instead use the AFN miniature cutting nozzle and Light Weight Shank & Cutting Attachment
Noz-Alls
Noz-Alls ANM-6 (Acetylene Nozzle Mix - 6 pre-heat cones) cutting nozzles have the traditional large tip diameter for maximum heat dissipation. These ANM cutting nozzles are easy to work with because they exhibit good resistance to backfire combined with focused pre-heat flame cones which are essential qualities required
for initiating and maintaining the cutting process thereby giving you the confidence to work quickly and efficiently without experiencing operating problems.
Noz-Alls
Produced to Noz-Alls own drawings we know that our ANM nozzles work safely and effectively giving you a safer and longer lasting nozzle compared to cheap versions that you can find in the market. Ensure that you complete your kit with something that works.  Our ANM-6 cutting nozzles have the original larger barrel diameter which is 15.4 - 15.6 mm plus our nozzle length is the original 75mm which helps provides the optimum performance.

As mentioned above, for your safety and that of those around you it is important that you do not use ANM-6 cutting nozzles on small / medium size acetylene cylinders (PortaPak / "J" size) this is because the ANM-6 nozzle even the smallest size 1/32" will draw off too much acetylene therefore it is important to use only the AFN / ASFN cutting nozzle range with small and medium size DA cylinders.

From regulators, flash back arrestors, hoses, quick connectors and torches, we have everything you could possibly need to go with your nozzles. Please feel free to browse in the related products section as well as the rest of our website.

The ANM range cuts from 3mm to 300mm. Please see our size information table below.

 

Nozzle

Size

(Inch)

Nozzle

Size

(mm)

Cutting

Thickness

(mm)

Acetylene

Pressure

(bar)

Oxygen

Pressure

(bar)

1/32 0.8 3-6 0.3 1.5
3/64 1.2 5-12 0.35 1.8-2.2
1/16 1.6 10-75 0.4 2.6-3.5
5/64 2.0 70-100 0.4 3.1
3/32 2.4 90-150 0.4 2.8-3.2
7/64 2.8 140-200 0.45 3.1-3.7
1/8 3.2 190-300 0.45 4.5-6.2


ANME's also cut the same range but offer a longer tip with increased backfire resistance. We also offer an ANME in a long taper version to help with cutting vision.
To cut more than 300mm please see our 'Heavy Duty ANME' in the related products
section.

0700143016, 0700143017, 0700143018, 0700143019, 0700143020, 0700143022

Why You Need to Pay the Right Price
When you pick up an ANM-6 in your hand what do you see, is it just a lump of copper with 20 holes in it with 10 external diameters and 3 tapers? 
 
Well typically that is what you see when you examine an ANM no matter whose ANM or ANME cutting nozzle you have purchased.
 
Very few people have sufficient experience to understand nozzle design and that although the external dimensions are important for most of those dimensions it is the internal sizes that dictate nozzle performance and those you cannot see.
 
Have you ever considered what makes the ANM-6 cutting nozzle function and operate correctly?  Well it all comes down to the internal design and manufacturing process, that is what determines just how the nozzle performs it is the arrangement of the internal holes and their sizes that makes all the difference to each nozzle.
 
Inside each ANM-6 there are 33 different diameter holes 6 individual mixing systems each of 5 different diameters and those hole diameters each interacting with the other to help provide the correct flame characteristics.
The design is not particularly difficult to achieve when made correctly however it is important for the design to be correct.
 
How do companies make cheap ANM nozzles, well to cut the cost of the nozzle – they simply take out some of the internal operations and hole diameters.
Due to the fact the changes are made internally you cannot see the cheapening of the nozzle.
To the untrained eye removing operations which may seem to be superfluous result in an inferior nozzle with poor performance when it counts. 
 
Less processing means less operations and less cost in manufacturing with quicker processing resulting in a cheap nozzle.
 
Externally the result looks the same and you would never know as the inside goes unnoticed until the nozzle doesn’t work correctly.­­­­­­
 

Finance - PayPal Credit

Login on PayPal at the checkout process; 
Click one of these two boxes. Simple! 


Spending over £99 on our website? If so, PayPal Credit is for you. It is essentially an interest free credit card without the card. 
You can make your purchase and pay it back over 4 months with 0% interest. Obviously if you take longer than 4 months to pay back there is interest associated to PayPal Credit, it's how they make their money. If however you pay the purchase off within the interest free time frame you will not pay anthing more than the purchase cost. 

To improve your chances of being eligible for PayPal Credit you must; 
1. Be aged over 18
2. Not be recently bankrupted 
3. Have an annual income over £7500 
4. Have a good credit history 

If you are to use PayPal credit then we can only ship to the PayPal verified address. We will not be able to ship to another location. 

Any use of PayPal Credit will lead to a contract between yourself and PayPal.
Related Products
NM 250 Excalibur 18
18x90 Cutter Excalibur NM250 Hand Cutting Torch 500mm long
Cutting Torch - Top Quality Nozzle Mix Cutting Blowpipe or Gas Axe.
£36.10 £60.36
(Inc £43.32)
View Options
Large Wheel Double Roller Cutting Guide 90 degree
Double Roller Cutting Guide - 65mm Dia. Wheels
£36.15 £48.65
(Inc £43.39)
Customer Reviews (0)