Elga and AGA Gas Equipment
Elga 3033456X - Elga Pipeline Optimator
Elga GasIQ Optimator Shielding Gas Economiser Flowmeter - Pipeline Outlet Point
£109.50
(Inc £131.40)
Out Of Stock
ANM Cutting nozzle UK type
ANM Afrox style ANM -6 asetileen snyspuitstuk
High Quality British Design Solid copper ANM-6 cutting nozzle with 6 pre-heat flames.
£4.48 £8.86
(Inc £5.38)
View Options
ANM Cutting nozzle UK type
Afrox style PNM -18 Oxy / propaan snypunt PNM
Oxy / Propane Cutting Nozzle PNM-18 Vacuum fuel inlet with 18 pre-heat flames.
£4.59 £8.86
(Inc £5.51)
View Options
ELGA D75 Equal Pressure Mixer - Propane Tips
D75 and X21 equal pressure mixer - supplied with 3 brazing nozzles for use with propane.
£40.42
(Inc £48.50)
Out Of Stock
Heating Head AGA X11 Elga D75 Injector type oxy / acetylene 500 & 800L
Elga Oxy / Acetylene injector heating heads are available in two sizes 500L & 800L.
£24.67
(Inc £29.60)
View Options
Elga 3033456X - Elga Optimator Shielding Gas Regulator
Elga GasIQ Optimator Shielding Gas Economiser Flowmeter
£161.15
(Inc £193.38)
Out Of Stock
ARCNM Nozzle Mix Rivet Cutting or Bulk Head removal Nozzle - Oxy / Acetylene
Angled Bolt Head Removal Cutting Nozzle -3 pre-heats (ARCNM has 2 pre-heats).
£21.35 £28.57
(Inc £25.62)
View Options
Cutting Nozzle PNME-18 IC Seat
PNME-18 Hand Cutting Nozzle Mixing Cutting Tip Copper Outer & Brass Inner
£5.69 £11.00
(Inc £6.83)
View Options
Cutting Nozzle Extra Long ANMXL-6 180mm
Cutting Nozzle 180mm Long - ANMXL - High Quality British Design
£50.53 £68.10
(Inc £60.64)
View Options
ANME-6 Cutting Nozzle 88mm Long ANML All Sizes
ANME-6 Oxy / Acetylene Cutting Nozzles Full Range - Noz-Alls Design
£5.76
(Inc £6.91)
View Options
Elga - X11 AGA Type Stirrup Nut
AGA X11 or Elga Style D75 Flip Over Stirrup Connection Nut
£14.48
(Inc £17.38)
Elga - ELGA D75 Injector shank - X11
Original Elga D75 ergo shank
£51.60 £71.36
(Inc £61.92)
Out Of Stock
Elga - ELGA D75 Injector Cutting Attachment - X11
ELGA D75 Injector Cutting Attachment 90 degree Head - X11
£51.60 £71.36
(Inc £61.92)
ELGA D75 NM Cutting Attachment
ELGA D75 Shank NM Cutting Attachment 90 Degree Head
£35.95 £49.71
(Inc £43.14)
ANM Cutting nozzle UK type
ANMS or ANM -6 Cutting Nozzle - Oxy/Acetylene
High Quality British DesignSolid copper ANM-6 cutting nozzle with 6 pre-heat flames.
£4.48 £10.86
(Inc £5.38)
View Options
Cutting Nozzle AGA style HA411 / D75 / HA211 Elga
Cutting Nozzle AGA HA411 HA211 Elga D75 or AGA X11 torch
£5.12 £9.94
(Inc £6.14)
View Options
Welding Nozzle AGA X11 or Elga D75 80L to 1000L Complete Injector Welding Heads
Injector Welding Nozzle complete with matched injector
£22.73
(Inc £27.28)
View Options