Multi Process MIG MAG Welder - Headux Titan 225Syn PFC Operates on Both 110V & 230V Supply
Includes:- A) Standard MIG (2 control) 30 - 225A
B) Semi-Synergic MIG 30 -225A
C) MMA Stick Welding 10 - 180 A
D) Lift TIG 10 - 225 A DC
- All Built on IGBT Inverter Technology
Ideal for site use where 110V is required being PFC
Machine includes 3m MB24 MIG style torch, 3m earth lead, regulator and gas hose with Quick Connect.
Additional options include:-
Euro fitting TIG torch and Dinse plugged MMA electrode holder available.
The Headux 225 Syn PFC MIG has more welding power plus has the power factor correction which allows operation on 110V and mains supply 230V. Great value for money with advanced features.
This 225 semi-synergic MIG welder has the advantage of being very simple and and easy to set whilst providing professional quality welds time after time.
The Headux Titan 225 is very powerful and compact operating with IGBT inverter technology makes this MIG MAG welder fully portable and is equally at home in an industrial environment as it is in a domestic garage. Adding PFC circuitry increases the versatility even further as it is able to auto detect the input voltage allowing operation from a 110V yellow transformer (32amp output) or a standard single phase 230V supply.
This Headux 225 Semi Synergic PFC MIG from Noz-Alls allows you to select from 7 welding modes which includes MMA or stick welding, Lift TIG, conventional MIG and 4 Synergic MIG settings so you may be confident wedling in any mode that you will achieve the professional results you need. This 225 welder has many more settings available to the artisan compared to a standard inverter MIG which also help improve welding ability.
Set to "conventional MIG welding mode" all 3 sizes of MIG wire may be used for mild steel and stainless steels, larger 1.2mm aluminium filler wire may also be used.
Typically mild steel ER70S-6 in 0,6mm - 0,8mm and 1,00mm on 5kg spools plus of course various types of stainless steel MIG wire as well as typically Aluminium 4043 & 5356 general purpose aluminium wires and not forgetting CuSi brazing MIG wire.
The softer MIG wire could be used with the spool on gun MIG torch. (See options).
Being able to turn the volts (amps) right down and weld with 0,6mm mild steel MIG wire makes this welder ideal for thin automotive panels. The adjustable soft start feature of the Headux 225 means that the welder will not "punch" a hole when you start to weld on thin metal - Typically soft start is pre-set to just 3m/min until the arc has been initiated.
Trigger mode of 2T or 4T may be set - special setting also allows crater fill adjustment.
Easy to use for less experienced welder and Advantages for the Pro Welder
It is the added features of the "225" that help to make this welder a joy to use compared to many welders the Headux 225 has several great advantages one of which is that that the wire speed drive has an adjustable "soft start" setting which prevents the wire feeding out fast which can "punch" into the weld metal, using the soft start the wire begins to feed at a reduced speed until the arc has been initiated. Once the arc has established the full welding wire speed then results.
For those novice welders who need to operate from 110V this Headux 225 is ideal as your starter welding machine which has the advantage that the welder will "grow" with you as you gain welding experience, because the 225 MIG welder has double digital displays, setting the same values again and again is easy. As you gain welding experience setting your welder "by ear" will also become easier and then the LED displays will become more useful for setting the more special functions or making specific changes.
The four synergic MIG functions make it easy to achieve ideal welding settings quickly no matter whether welding from 0.5 mm material through to 8mm thick material.
Functional Details
Your Headux Titan 225 synergic compact MIG welding machine is supplied as a complete MIG package, this 30 to 225 amp welder is both simple and easy to set up having just 2 or 3 key controls depending on the process you have selected:-
1) Process selection switch - MMA - TIG - MIG - MIG synergic x 4
2) Digital adjustment knob "A" (left) function depends on process selected.
3) Digital adjustment knob "B" (right) function depends on process selected.
Simply set the process selection switch to your desired process choice:-
A) MMA - "Stick" welding
B) TIG - Lift TIG with some setting options
C) MIG - Conventional 2 control MIG welding
D1) MIG - Synergic Mild steel wire 0.8mm with Argon / Co2 90% / 10% mix shielding gas
D2) MIG - Synergic Mild steel wire 0.9mm with Argon / Co2 90% / 10% mix shielding gas
D3) MIG - Synergic Mild steel wire 0.8mm with Argon / Co2 / Oxy mix of 93% / 5% / 2% mixed gas
D4) MIG - Synergic Mild steel wire 0.9mm with Argon / Co2 / Oxy mix of 93% / 5% / 2% mixed gas
Controls when using MMA mode
Function control knob "A" (left) adjusts welding current viewed in LED display 1 Current range 10 to 180 A
Function control knob "B" (right) adjusts arc force viewed in LED display 2 - Arc force from 0 to 99%
Display "B" reverts to the welding voltage after adjusting the arc force.
The "VRD" circuit is active automatically for improved safety.
Ignition current and the ignition time (0-0.99 of a second) may be preset.
Hot start is also adjustable for easy welding rod ignition
When using Lift TIG mode
Function control knob "A" (left) adjusts welding current viewed in LED display 1 Current range 10 to 225 A
Function control knob "B" (right) adjusts Down slope time viewed in LED display 2 Time in seconds from 0 to 10 in increments of 0.1 of a second.
Other controls include 2T & 4T trigger selection
Other TIG setitngs which are also adjustable are the pre current, pilot arc, slope up time, pre-flow and post flow in seconds.
The Noz-Alls TIG torches which are available simply screw directly into the MIG torch socket which thereby provides the welding current as well as the TIG shielding gas flow as and when the TIG torch button is depressed - 2T or 4T trigger mode is possible.
Very simple to fit and use either the WP 29 or the WP 9 style TIG torches with both styles providing automatic gas control and welding power at the press of the button.
When using Standard MAG / MIG mode
Function control knob "A" (left) adjusts wire speed from 1.5 to 15 m/min wire speed is viewed in LED display 1
Function control knob "B" (right) adjusts voltage from 14.5 to 26.5 V adjusted in 0.1 volt increments as viewed in LED display 2 = 130 power level settings.
MIG trigger latching is possible with either 2T or 4T settings.
Soft start wire feed rate is adjustable (m/min).
Crater fill wire feed speed is adjustable (m/min).
Crater fill voltage is adjustagle (V).
Down slope time is adjustable (Seconds)
Pre-flow shielding gas is adjustable (Seconds)
Post-flow of shielding gas is adjustable (seconds)
When using MAG synergic mode 1
Function control knob "A" adjusts wire speed which you set to suit your material thickness synergic mode 1 having wire speed range between 3,0 and 13m/min the wire speed being viewed in LED display 1.
All other welding parameters are set by the program in the welder so as to provide the best welding results.
Function control knob "B" allows you to make small adjustments to the welding voltage to suit your weld joint and technique, the voltage may be "trimmed" between -ve 1 volt to +ve 1 volt from the predetermined welding level (16,5 to 26,5) and is viewed in LED display 2
When using MAG synergic mode 2
Function control knob "A" adjusts wire speed which you set to suit your material thickness synergic mode 1 having wire speed range between 2,5 and 7,5 m/min the wire speed being viewed in LED display 1.
All other welding parameters are set by the program in the welder so as to provide the best welding results.
Function control knob "B" allows you to make small adjustments to the welding voltage to suit your weld joint and technique, the voltage may be "trimmed" between -ve 1 volt to +ve 1 volt from the predetermined welding level (18,1 to 24,7) and is viewed in LED display 2
When using MAG synergic mode 3
Function control knob "A" adjusts wire speed which you set to suit your material thickness synergic mode 1 having wire speed range between 3,0 and 13m/min the wire speed being viewed in LED display 1.
All other welding parameters are set by the program in the welder so as to provide the best welding results.
Function control knob "B" allows you to make small adjustments to the welding voltage to suit your weld joint and technique, the voltage may be "trimmed" between -ve 1 volt to +ve 1 volt from the predetermined welding level (14,5 to 24,5) and is viewed in LED display 2
When using MAG synergic mode 4
Function control knob "A" adjusts wire speed which you set to suit your material thickness synergic mode 1 having wire speed range between 2,5 and 7,5 m/min the wire speed being viewed in LED display 1.
All other welding parameters are set by the program in the welder so as to provide the best welding results.
Function control knob "B" allows you to make small adjustments to the welding voltage to suit your weld joint and technique, the voltage may be "trimmed" between -ve 1 volt to +ve 1 volt from the predetermined welding level (16,1 to 22,7) and is viewed in LED display 2
In all four of the Synergic MIG welding modes the following parameters may be pre-set to suit your welding needs:-
Soft start wire feed rate is adjustable (m/min).
Crater fill wire feed speed is adjustable (m/min).
Crater fill voltage is adjustagle (V).
Down slope time is adjustable (Seconds)
Pre-flow shielding gas is adjustable (Seconds)
Post-flow of shielding gas is adjustable (seconds)
Conventional Welding Modes
When in conventional welding modes, once you have set your machine to the required welding process you are able to set your welding current at exactly the right level for the job you need to do by adjusting a fraction of an amp as and when required. (No big step changes in power). The digital controls enjoy 20 "indents" per revolution, however when you rotate the control quickly by 1/4 of a turn the adjustment is coarse and will adjust to full scale quickly, whereas if you rotate the digital control slowly the adjustment is 0.1 per indent.
Your MIG machine package includes a top quality Euro mounting MIG torch MB24 style x 3m plus 3m long work return lead. Other torch options are available on request, typically CWS MB24 4m or 5m long, or the smaller CWS MB15 - 3m, 4m, or 5m or the larger MB25 3, 4 & 5m. The filler wire is fed through a good quality metal wire feed drive incorporating a 40 Watt motor which helps ensure smooth and consistent wire feeding.
In line with professional MIG welders there is a control socket for “spool on gun” MIG torch for Aluminium welding plus CuSi brazing.
The Headux 225 Semi-Synergic PFC MIG has built-in automatic burn back control to prevent the wire buring back to the contact tip.
MIG amperage range 30-225
MIG voltage range 14.5 - 27,5
MMA amperage range 10-180
MMA voltage range 20 - 26.4
Duty cycle measured @ 40°C
MIG 40% at 225 Amps &
MIG 100% at 127 Amps
MMA 40% at 160 amps
MMA 60% at 120 amps
230 volt 50Hz input 9.1kVA
2 roll metal wire feed drive with 40 Watt motor
Wire inch button
Fitted gas hose with quick connector
3m MB 24 style MIG torch (longer options or higher rated torches available).
Proper flow regulator with flow tube 2-30L/min
Front panel spool on gun connection for aluminium welding & CuSi. fillers
Accepts 5kg / 200mm wire spools
Instruction manual - Quick start guide - written by Noz-Alls.
2 year warranty
16 amp blue plug (not fitted) (32 amp blue / yellow plugs available at extra cost).
Size L x W x H = 520mm x 195mm x 380mm - Weight 15,5kg
The 225 MIG welder has built-in features such as smooth arc welding ability plus anti spatter control which are included in the lower power sister products, the Titan 188 & 195 however this 225 MIG welder adds extra welding power plus the PFC operational ability copmbinded with many extra settings and welding controls as well as the synergic smart set programs - welding with 0,8 & 0,9 mild steel MIG wires - ensure this MIG is very easy to set and weld with plus of course the extra functionalabilty provided through the range of extra settings improves the TIG and MMA welding functions.
The Titan 225 adds dual LED power read outs making repeat setting very easy coupled with the digital rotary controls.
As you can see, this Headux 225 MIG is no ordinary small, compact MIG welder because this machine is powerful enough to get your job done.
Headux is a relatively new welding machine brand to the UK market , the advantages of Headux is in providing exceptional product quality along with advanced features ensuring we deliver the best value for money. Your money buys a really capable workhorse you are able to rely on for top quality welds which means you get your job done as planned.
Standard 2 year warranty can be extended to 5 years.
.png)
.jpg)
