13mm Bore Blue Oxygen Hose - 25m long with 1/2" BSP Fittings

Good quality standard oxygen hose in a 25 meter length t-Allshis hose has been produced for heavy duty applications where higher flow applications may be supported by the larger 13mm (1/2") bore and G1/2 fittings at each end.  This hose does not have a hose check valve fitted so that the flow will not be restricted thereby allowing the process to function correctly and safely.

Noz-Alls supply these better quality hoses for heavy duty applications, these hoses are available with steel or stainless steel overbraid and will be made to order, however for extended life and very heavy duty applications Noz-Alls are able to supply superior heavy duty hoses even when compared to these hoses which are better than standard hose.

Many suppliers of hoses are not fully aware of the BS EN standards with regards to the fittings that should be used. Our hoses are all fitted with nuts that conform to the correct standard and nipples / hose tails that are of the correct design, i.e. an oversized barb which usually requires the hose to be heated to push on. Theoretically once fitted they should not leak even without an O clip. Other nipples that get used simple slide into the hose and rely on the crimp or the clip to keep the hose attached.