HMT VersaDrive Drill Tap Set - 301125-SET1
Drill and Tap to M5, M6, M8, M10 and M12

Drill and tap with just one drill bit. The maximum material thickness you can drill is matched to that of the drill bit. For example if you have 10mm steel and need to drill and tap an M8 thread you will need to buy the separate drill and tap set (see related items below). However, if you need to drill and tap M10 or M12 threads into your 10mm steel then this set can do it. 

Impact Chipbreaker action for effective swarf evacuation
Drill pilot holes and then tap in one fast easy operation
Ground flute twist drill creates the correct pilot hole size
Rated for material thickness no greater than the diameter of the drill-tap
Industrial grade Titanium Nitride coating reduces heat buildup and burn-out
Use on Impact to prevent dangerous kickback caused by handheld rotary tools
Heavy-duty hex shank design for secure non-slip operation
Impact-rated due to dual hardening process - allows up to 15X faster speed than traditional methods

5pc Set Set Contents: M5, M6, M8, M10, M12 Metric Course STAKIT Small InsertFoam set, comptaible with STAKIT ETOP2 and ETOP4 Top Cases (available separately) For fastest performance use on impact wrenches & impact drivers Check minimum torque requirement Up to M10 (3/8") can also be used on cordless drills Tap the hole in one pass where possible, applying adequate lubrication before you start Laser cut holes & Stainless Steel require higher torque Use appropriate lubrication and correct RPM to achieve long tool life