Cutting Torch 835mm Long 70 or 90 or 180 Degree Head With Propane injector
Injector cutting blowpipe based on the traditional flat seat nozzles H6290 style cutting tips. The 62-5F style cutting blowpipe has a propane injector jet fitted ("F") so must only be used used with oxy / propane gases.
The extended length is preferred for heavier industry applications, 835mm long combined with the 105 (70) degree head angle makes it ideal for use when standing with the torch operating at almost ground level.
Inlet connections may be either the American "B" inlets or the UK G3/8 - please specifiy which you require when you order.
American "B" fittings are 9/16 x 18 tpi UNF.
These blowpipes have been built with a good quality injector which sucks across a wide pressure range, along with high quality flow control valves and full brass contruction to ensure this torch is suitable for the demands which will be made of it.
Each torch is stripped and checked in the UK by Noz-Alls limited to ensure that the torch functions correctly and safely.