Cutting Nozzle For Use With Apachi Fuel Gas
The Apachi gas cutting nozzle is similar to the oxy / propane cutting nozzle range only the nozzle is designed to operate with Apachi gas or Propylene.
These cutting nozzles are available in a full range of sizes to enable cutting between 3mm through to 300mm thickness.
Apachi Gas burns slightly hotter than oxy / propane and uses a little less oxygen.
Oxy / propane typically burns at 2820 C with an oxygen ratio of 4::1
Oxy / propylene typically burns at 2910 C with an oxygen ratio of 3.4::1
Oxy / acetylene burns at 3106 C with an oxygen ratio of 1.1::1