CCMS - Copper Coated Rods - Mild Steel Welding Rods For Oxy / Acetylene Fusion Welding - CCR
Welding of mild steels with oxy / acetylene whether it be a classic car or motorbike repair or maybe the project you have always wanted to undertake. CCMS welding rods are your ticket to getting the job done.
Always use the correct size welding nozzle for the material thickness you will be welding, remember that a welding nozzle should not be turned up to increase heat when required because the flame cone becomes too forcing making welding difficult, however each wedling nozzle has a 50% turn down ratio so choose the next larger nozzle and reduce the flame size to ensure you have the heat required. Choosing a larger diameter CCR welding rod also has the effect of freezing the weld pool more quickly.
Welding rods are 1000mm long with "ID" marker on the end. These rods are for use with general mild steel, higher strength filler rods are available.
The rods will be supplied in a cardboard tube for protection during transport.