Cutting Nozzle Extended Length ANMXL 140mm Oxy Acetylene - 6 pre-heats
Traditional BOC extended ANML cutting nozzle was 127mm long, this nozzle is slightly longer at 140mm and is easier to use due to the reduced body diameter. As with a standard ANM-6 the ANMXL has 6 pre-heat outlets.
It almost goes without saying that this nozzle will reach where a standard nozzle length cannot. If you are working in tight spaces and needing to cut something far from the torch then this ANML will help you out of a tight spot.
Nozzle
Size
|
Nozzle
Size
(Inch)
|
Nozzle
Size
(mm)
|
Cutting
Thickness
(mm)
|
Acetylene
Pressure
(bar)
|
Oxygen
Pressure
(bar)
|
2 |
1/32 |
0.8 |
3-15 |
0.2 |
1.5-3.0 |
3 |
3/64 |
1.2 |
5-20 |
0.2 |
1.5-3.5 |
4 |
1/16 |
1.6 |
10-75 |
0.2 |
3.0-4.5 |
5 |
5/64 |
2.0 |
50-100 |
0.35 |
3.0-4.5 |