Long Cutting Nozzle 180mm OAL - ANMXL-6
The traditional BOC extended ANML cutting nozzle was 127mm long, this nozzle is 180mm, has 6 pre-heat flames the same as a standard type cutting nozzle.
These extended length cutting nozzles are designed to access hard to reach areas. They are often used for the castellation of 'I' beams, RSJ's to help get closer to the cut with a standard cutting torch than you could when compared with an ANME.
It almost goes without saying that this nozzle will reach where a standard nozzle length cannot. If you are working in tight spaces and needing to cut something far from the torch then this ANMXL will help you out of a tight spot. The reduced barrel diameter helps to make the nozzle easier to manipulate.
Nozzle
Size
|
Nozzle
Size
(Inch)
|
Nozzle
Size
(mm)
|
Cutting
Thickness
(mm)
|
Acetylene
Pressure
(bar)
|
Oxygen
Pressure
(bar)
|
|
|
|
|
|
|
3 |
3/64 |
1.2 |
3-20 |
0.2 |
1.0-3.0 |
4 |
1/16 |
1.6 |
10-75 |
0.2 |
1.0-3.5 |
5 |
5/64 |
2.0 |
50-100 |
0.35 |
3.0-4.5 |
Nozzle price has increased due to a manufacturing cost increase plus the fact that we purchase in USD so that has added 25% to our cost.