Filarc 118 - E11018-M Mn2NiMo Arc Welding Rods - 2.5mm 7.2kg Pack
The Filarc 118 is an all-positional, basic AC/DC electrode with 120% recovery for welding steels with a minimum yield strength of 680 N/mm2.
This includes metals such as NAXTRA 70, T1, 80 HLES, HY80 and HY100.
For best results use the shortest possible arc and weave slowly when permitted. A slight weave can be used for standing fillet welds.
Ideally use these rods on DC+. The exception to the rule is root runs when DC- is preferred.
Typical Charpy V-Notch Properties
As Welded
Impact Value 59 ft-lb
Impact Value 80 J
Shielding Gas ISO
Testing Temperature -58 °F
Testing Temperature -50 °C
Typical Tensile Properties
Condition: As Welded
Elongation: 22 %
Shielding Gas: ISO
Tensile Strength: 800 MPa (116 ksi)
Yield Strength: 740 MPa (107 ksi)
Deposition Data
Current: 55-105 A
Deposition Rate: 46.6 sec
Diameter: 2.5 x 350.0 mm (0.098 x 13,8 in.)
Deposition Efficiency (%): 61
Number of electrodes/kg weld metal: 83
Voltage: 25.3 V
Classifications
Classifications SFA/AWS A5.5 : E11018-M
EN ISO 18275-A : E 69 5 Mn2NiMo B 32 H5
Approvals
Approvals ABS E11018-M
BV 4Y62 H5
CE EN 13479
DNV-GL 4 Y62H5
LR 4Y62 H5
MoD (N) Q1N, HY80
Seproz UNA 272581
Approvals are based on factory location. Please contact ESAB for more information.
Consumable Characteristics
Alloy Type Low alloyed (2.3 % Ni, 0.4 % Mo)
Coating Type Basic covering
Diffusible Hydrogen < 5.0 ml/100g
Welding Current AC, DC+-
Typical Weld Metal Analysis %
C: 0.06%
Cr: 0.06%
Mn: 1.65%
Mo: 0.44%
Ni: 2.27%
Si: 0.32%