Acetylene Gas Pressure Reducing Regulator 0-1,5 bar
Top quality GCE acetylene regulator designed to fit top outlet (BOC UK) cylinders so has the normal length inlet stem at the base of the regulator required to ensure the regulator may be correctly operated with the cylinder valve guard in place.
The flow rate from the regulator should be sufficient for most typical oxy / acetylene applications even when DA cylinders have to be connected together to be able to provide the gas flow required for the nozzle concerned.
DA regulator connected to single large industrial DA cylinder will provide flow for :-
- Lt. Wt. welding nozzles # 1 to #25
- Swaged type 5 welding nozzles #1 to #35
- ANM-6 cutting nozzles size 1/32 to 5/64"
- ANME-6 cutting nozzles size 1/32 to 5/64"
- AGNM #13 gouging nozzle
- AHT #25 heating nozzle
- Lt. Wt. Heating #1 to #3
- NM heating #1 to # 3
- Pin blowing nozzles #1 to #4
- Model "O" welding nozzles #1 to #5
There are many other nozzles styles which may be successfully operated on a single (industrial size) acetylene cylinder.
Coupling 2 or 3 cylinders together with the 3 way cylinder adaptor and flexible connections allows the use of:-
- Lt. Wt. welding nozzles # 1 to #25
- Swaged type 5 welding nozzles #45 to #90
- ANM-6 cutting nozzles size 7/64 to 1/8"
- ANME-6 cutting nozzles size 7/64 to 1/8"
- ANME-6 HD cutting nozzles size 7/64 to 1/8"
- ANME-10 HD cutting nozzles size 7/64 to 3/16"
- AGNM #19 & #25 gouging nozzle
- AHT #50 & #100 heating nozzles
- Lt. Wt. Heating #4
- NM heating #4 to # 6
- Pin blowing nozzles #5 to #7
- Model "O" welding nozzles #1 to #5