High Pressure Single Stage S400 Oxygen / Nitrogen / Argon Regulator 0 - 28 bar / 0-400 PSIG
Single stage high pressure regulator suitable for use with inert gases or oxygen having a pressure range from 0 to 28 bar. Label to suit the gas required.
Inlet connection is a standard UK bullnose with a G3/8 right hand outlet connection.
2 pressure gauges indicate the working pressure plus the cylinder contents pressure.
Base inlet typically suits "BOC" type cylinder valves but this regulator may be fitted to side outlet cylinder valves as the outlet is at 90 degrees to the inlet so will not foul the valve guard.
This is a single stage regulator which means that the regulator has one pressure reducing valve and diaphragm system.
The regulator has a normal G3/8 (3/8 BSP right hand) outlet connection thread with concave cone (BS EN 560) to accept a standard nipple head.
It is very important to follow correct opening and closing procedure with any regulator so as to prevent the regulator diaphragm being popped out.
Do not use with standard "welding" hoses as the maximum working pressure for standard hose is only 20 bar.
This regulator would not typically be used for oxy / fuel cutting - see the OR14 high flow high pressure regulator.
This regulator would be used for other high pressure applications - such as mixing high pressure Laser cutting gases.