Hilco Hardmelt 600 4.0mm 5.9kg Pack - 36908
Hardmelt 600 is our basic coated electrode for wear resistant surfacing parts of steel, cast steel and high Mn-steel, subject to abrasion, metal-to-metal wear, impact and/or compression stresses. Deposit weld metal has a martensitic structure, hardness of pure weld deposit approx. 600HB. After welding the deposit can be machined by grinding only.
Applications:
Hardmelt 600 is particularly suitable under conditions of heavy abrasion and friction, combined with impact.
Ideally suitable for applications involving rolling, sliding and metal-to-metal wear.
Applications are universal but typical for hardfacing parts e.g. agricultural, earth moving and stone crushing industry, hardfacing crane and mine car wheels, sprockets and gear teeth, skip guides, dredger buckets, scrapper blades, cable sheaves, tractor and shovel parts, dragline buckets, conveyor chains, hammer heads, clutch jaws.
DIN 8555 : E 6-UM-60
EN 14700: E Fe8
Type: Stick electrodes
Chemical composition, (by weight % of weld metal) typical:
C: 0.5, Mn: 0.4, Si:2.3, Cr: 9.0, Fe: bal
Mechanical properties, weld metal – typical:
As welded 1 layer: 56-58 HRc
After soft annealing 780-820ºC / oven: approx. 25 HRc
After hardening 1000-1050ºC / oil: approx. 60 HRc
1 layer on high Mn-steel: approx. 22 HRc
2 layer on high Mn-steel: approx. 40 HRc