Jasic Multi Process Pulsed 350 A Welder
As you see is as you get with the addition of a torch, work return, 2m interconnect, gas hose and regulator. This 350 amp machine is the very first in Jasic's range of pulsed welders. If you are doing lots of stainless or aluminium then this machine is the perfect one for the job. Producing TIG like finishes in a fraction of the time you will be saving yourself so much money it really is a machine that pays for itself!
With an integrated water cooler, robust trolley able to take a full size cylinder and rugged machine parts this is an investment that will prove to be excellently reliable. If there is anything you need in terms of performance from this machine you should be able to do it;
Synergic MIG or MAG
Single Pulse
Double Pulse
MMA modes
This machine is almost unrivaled in terms of performance with a 60% duty cycle on maximum amperage and a low amps range starting at just 10 amps. When people say that this machine does it all you can really see why.
If you are looking for a machine that does MIG at its best then you may like to try this machine before you buy. If you do, please just get in touch and we can arrange a demo at our trade counter or if you are local we can come out to you. What is more, you will be covered by a 5 year warranty with any Jasic machine bought through Noz-Alls. To make it really simple, we register the warranty for you all you have to do is carry on making money and if your machine was to fail there is a small fleet of Jasic field engineers who will come to you to get you back up and running.
If you are still in need of knowing more please review the stats below before making your decision.
Key Features
Easy parameter settings
DSP digital technology (Optimum welding performance)
Self-diagnostic protection system for extreme reliability
Double and single pulse options
Synergic curves (easy settings for most materials)
Encoder feedback control for wire feed
Burn back control
Noz-Alls Ltd
Wire feed button
Advanced control circuitry (less spatter, more stable arc and better weld appearance)
4 roll feed unit
Variable inductance
Gas test function
Water cooler
Technical Spec
Input Voltage |
400 V AC (3 Ph) 50/60 Hz |
Recommended Input Fuse |
32 A |
Current Range |
10 - 350 A |
Voltage Range in MIG |
12 - 39 V |
No-Load Voltage |
70 V |
Wire Speed (m/min) |
1-18 |
Duty Cycle @ 40°C |
350 A @ 60% |
Wire Spool Size |
300mm Dia. (15kg Spools) |
MMA Current Range |
10 - 350 A |
Power Factor |
0.85 |
Protection / Insulation Class |
IP21S |
Recommended Generator Size |
15 kVA (should be AVR) |
Dimensions |
780 x 380 x 610 mm |
Weight |
55kg Source and Feeder only |