Jasic Multi Process Welding Machine - 350 amps with Water Cooler. 

While the picture shows the air cooled version is is very clear where the water cooler fits into this machine. Simply the draw at the bottom is removed and the water cooler is located into place. This is the first of Jasic's water cooled 3 Phase separates range which includes the trolley and wheeled wire feed unit. It will take a wide range of wire diameters from 0.6mm wire right through to 1.2mm. Using an IGBT power source this machine setup is a formidable piece of kit and will run at 350 amps for a 40% duty cycle subject to 40°C temperatures. 

If you are looking for a machine targeted to medium to heavy duty industry then you may have just found the right machine for your business. What is more, you will be covered by a 5 year warranty with any Jasic machine bought through Noz-Alls. To make it really simple, we register the warranty for you all you have to do is carry on making money. 

If you are still in need of knowing more please review the stats below before making your decision. If you are based locally to ourselves or feel you need to try before you buy please get in touch and we will be happy to help.

Key Features

Burn back control
Wire feed button
Advanced control circuitry (less spatter, more stable arc and better weld appearance)
4 roll feed unit
Variable inductance 
Gas test function 
Water cooler

Technical Spec

Input Voltage	400 V AC (3 Ph)   50/60 Hz
Recommended Input Fuse	32 A
Current Range	50 - 350 A
Voltage Range in MIG	15 - 36 V
No-Load Voltage	65 V
Wire Speed (m/min)	1-16
Duty Cycle @ 40°C	350 A @ 40% (Both MMA and MIG)
Wire Spool Size	300mm Dia. (15kg Spools)
MMA Current Range	20 - 350 A
Power Factor	0.93
Protection / Insulation Class	IP21S
Recommended Generator Size	15 kVA (should be AVR)
Dimensions	760 x 365 x 585 mm
Weight	49kg Source and Feeder only