Jasic Multi Process MIG Welding Machine - 450 amps with Water Cooler.
"MIG Separates" so has the demountable wire feed.
While the picture shows the air cooled version it is very clear where the water cooler fits into this machine. The draw at the bottom is simply removed and the water cooler is located in its place. This 450 amp machine is the bigger brother of the 350 version and comes with all the same benefits but is suited to the heavier industry. Subtle changes internally like the wire feed motor being upgraded are not so noticeable but the most critical difference is the duty cycle being 100% at 400 amps!
If you are looking for a beast of a machine then you might have just found the right machine for your business. What is more, you will be covered by a 5 year warranty with any Jasic machine bought through Noz-Alls. To make it really simple, we register the warranty for you all you have to do is carry on making money and if your machine was to fail there is a small fleet of Jasic field engineers who will come to you to get you back up and running.
If you are still in need of knowing more please review the stats below before making your decision. If you are based locally to ourselves or feel you need to try before you buy please get in touch and we will be happy to help.
Key Features
Burn back control
Wire feed button
Advanced control circuitry (less spatter, more stable arc and better weld appearance)
4 roll feed unit
Variable inductance
Gas test function
Water cooler
Technical Spec
Input Voltage |
400 V AC (3 Ph) 50/60 Hz |
Recommended Input Fuse |
45 A |
Current Range |
60 - 450 A |
Voltage Range in MIG |
15 - 40 V |
No-Load Voltage |
72 V |
Wire Speed (m/min) |
1-18 |
Duty Cycle @ 40°C |
400 A @ 100% MIG (80% MMA) |
Wire Spool Size |
300mm Dia. (15kg Spools) |
MMA Current Range |
30 - 400 A |
Power Factor |
0.91 |
Protection / Insulation Class |
IP21S |
Recommended Generator Size |
20 kVA (should be AVR) |
Dimensions |
760 x 365 x 585 mm |
Weight |
53kg Source and Feeder only |