Kemper VacuFil 125 On Torch Welding Fume Extractor For High Industrial Usage
Item code: PA 0749
: £5025.00
£ 4,750.00(Inc VAT £5,700.00)
Kemper VacuFil 125 single workstation fume extractor is designed for very high industrial use for those welding on a daily basis this Vacufil 125 provides the highest on torch welding fume extraction when coupled with our Extraction MIG torches with very low operating costs.
Earn 4 points when you buy this item.
Welding Torch Exhaust VacuFil 125
For permanent use with automatic volume flow adjustment

The Kemper VacuFil 125 is for a single work station and is a high vacuum extraction unit for large quantities of welding fume and dust and is designed for permanent use with torch integrated extraction during welding as it has automatic filter cleaning.  The VacuFil 125 makes use of a side channel compressor for vacuum generation which ensures robust performance expected by industrial users.  The automatic volume flow adjustment makes sure that the optimum operating point is maintained for a wide variety of flue gas extraction torches – See the Noz-Alls range of MIG  torch extraction  as they are not as clumsy or bulky as others on the market plus they extract fume properly.

 The Kemper VacuFil 125 is designed for:-
  • High levels of smoke and dust
  • Non-stop operation
  • Torch extraction
  • Best health protection for employees through the use of KemTex® ePTFE
  • filter cartridges with surface filtration
 Advantages of the Kemper VacuFil 125
  • Simple and precise flue gas extraction torch selection via touch display with automatic volume flow adjustment
  • Uninterrupted continuous operation due to automatically controlled filter cleaning
  • Fleet management, remote maintenance and pre-noise maintenance using autarkic networking via mobile radio to the KEMPER cloud
Key Technical Features
  • Automatic filter cleaning, pressure-controlled
  • Side channel compressor
  • KemTex® ePTFE filter cartridges
  • KEMPER-Cloud connection via mobile radio
  • Contamination -free dust disposal in one-way containers.
  • Control via touch panel
 
Filter
Filter Stages 1
Filter Technology Cleanable Filter
Filter Cleaning Method Rotating nozzle
Filter surface 4 m²
Type of filter Filter cartridge
Filter material ePTFE membrane
Filter efficiency 99.9%
Dust classification M
Extraction capacity 125 m³/h
Dimensions (w x d x h) 635 x 885 x 1160 mm
Weight 120kg
Motor power 1.5kWatts
Power supply 110V or 230V or 415 V at 50 Hz
Rated current 230V = 5.8 Amps
Noise level 66dB (A)
Fan type Side channel blower
Compressed air supply 6 bar
Hose connection 45mm dia.


Our quick video clip shows welding with the Holch torch extraction "on" followed by the Kemper MiniFil vacuum having been turned  "off" so you see the normal fume as a direct comparison, then the Vacuum turned back "on" the close up didn't work as my stills camera doesn't refocus easily.  We will reshoot later.  The Headux 250C Welder was operating at 230 Amps welding with 1,0mm mild steel ESAB G3Si MIG wire with the wire speed at 16,5 m/ min.
The Holch MIG torch is the MHS350 air cooled version which has the same front end as the water cooled MHS 450.










Duty:100%
Amps:5.8

Voltage:230
Watts:1500















Kemper
New
82 400

Customer Reviews (0)

Products In This Category

Kemper Dusty Welding Fume Filter Double inlet
Kemper Dusty is compact 300 x 300 x 690 mm high
£935.00
(Inc VAT £1122)
Price on Application
£0.00
(Inc VAT £0)