Ni1 - Mild Steel TIG Welding Wire 1.6mm ER80S-Ni1 5kg Spool
ER80S-Ni1 TIG Welding Wire / Rods
We supply this rod in full 5kg packs as well as smaller packs for those that do not regularly require this rod. Please see the related products below for other weight amounts.
Adheres to AWS A5.28 ER80S-Ni1, EN ISO 14341-A G3Ni1
This TIG rods is designed for welding fine grained low alloyed steels and Austempering steels.
These ER80S-Ni1 TIG rods may be used for joining of carbon manganese high strength steels, requiring good toughness at temperature as low as -40°F.
Chemical analysis (Typical) %
Mn: 1.2
Ni: 1.00
Si: 0.7
Cu: 0.25
Cr: 0.15
Mo: 0.15
C: 0.09
V: 0.03
S: 0.015
P: 0.015
Suitable for welding in all positions.
Rm: 600 N/mm sq
Rs: 480 N/mm sq
Al: 26%5d
Kv: 100J -50 deg C
Use pure argon and best preheated to 135-165 deg C.
Suitable for the following base materials: A106, A515, A714, A131, A369, A210, L290, P235 T1/T2, P275 T1 ; L360, L415 ; P275T2, P355N ; X-42, X46, X62, X60 ; P235GH, P355GH ; A283, A285, A414, A372, A662, S275, S420, A516, A255, A333, A350, A612