E6010 Welding Electrodes from Nikko C-10 2,6mm Pipe Root run Electrodes Vac Pac 2kg
These cellulosic welding electrodes are generally used for pipe root runs where good penetration is required to ensure full strength is obtained.
Supplied in a vacuum pack of 2kg these electrodes have a good shelf life and are ready for use when you need them.
These C-10 rods need to be put down with a DC Stick welder - DCEP.
If you have a stick welder with AC output then you will need the C-11 electrodes or E6011 rods as these may be put down with an AC or DC current. The rods feature the same very tight arc as the C-10 rods and both are cellulosic type flux coating.