Jasic Plasma Cutting Electrode - PT-100 (PT100)
This electrode will fit many different torches and not just those that come with the Jasic machines. If your torch model number is PT, M, ML, VP, PL etc and ends 100 the chances are it will fit. The first two letters are more often than not the ID that manufacturer uses so it is each to their own. Critically, if it looks like the same part - measure it up to make sure.
The PT 100 plasma cutting torch is supplied with the Jasic Cut 60, Jasic Cut 80 and the Jasic Cut 100. If you are using the original torch supplied with your machine then make sure you use the same original quality parts that were first supplied with it.
Measurements taken from one piece only. Assume measurements as approximate.
Nut section = 9mm across the flats (9.04, 8.99, 8.97)
Diameter = 6.82mm
Overall Length = 25.03mm
Sold per piece.
Nut section = 9mm across the flats (9.04, 8.99, 8.97)
Diameter = 6.82mm
Overall Length = 25.03mm
Fits but not limited to:
Jasic Cut 60
Jasic Cut 80
Jasic Cut 100
Vector C101