Standard Mild Steel MIG Wire - 15kg 1.0mm SG2 G3Si ER70S-6 - 72 Reels

Ignore the branding on the box, this wire is not a hardfacing wire or a flux cored wire. This is a great quality 15kg MIG wire with approvals for CE, TUV, DB and UKCA. 
EN/ISO Standard 14341-A
EN/ISO Classification G 42 3 C1 / G 42 4 M21 3Si1
AWS Standard A5.18
AWS Classifcation ER 70S-6

This copper coated mild steel MIG wire is suitable for single and multiple pass welding of unalloyed and low alloyed mild steels. Supplied by WeldingDirect.co.uk on a plastic spool and precision layer wound. All Hard Core brand wire is produced from green steel which is virgin raw material sourced from a specialist mill to ensure reliability and good quality. It is suitable for all positional welding. Test certificates are available to be emailed over if required. 

Recommended Settings
1.0mm - 80-300 Amps (18-32 Volts)

Mechanical Properties with C1 Gas (100% CO2)
Tensile Strength - 540 N/mm sq 
Yield Strength - 440 N/mm sq
Elongation - 30%
Impact Strength - 70J
Test Temperature - -30 Degrees C

Mechanical Properties with M21 Gas (Mixed Gas)
Tensile Strength - 580 N/mm sq 
Yield Strength - 460 N/mm sq
Elongation - 26%
Impact Strength - 90J
Test Temperature - -40 Degrees C