PortaCut small cylinder trolley set - Complete minus Hobbyweld Oxygen 

If you are local to Noz-Alls then come on in and collect it, that way you can also have the Oxygen bottle at the same time. 
Become truly portable with this small Portacut cylinder trolley setup. The trolley is made locally in Gloucestershire and is designed specifically with the 9 ltr Hobbyweld cylinders in mind. The ultimate in a portable set without a difficult sized propane cylinder in the way. 
Couple up your propane and oxygen cylinders to suitable regulators, BAM approved flashback arrestors, hoses and torch to easily start your work, and pack away quickly. Hoses available are the 6mm standard hose or our very popular, UK produced microbore hose. 

Each small propane canister should outlast two Hobbyweld oxygen cylinders thanks to the liquid storage of Propane when used for brazing and heating. This figure changes to 3 cylinders of oxygen when used for cutting. Our small oxy / propane cutting set using the PFN cutting nozzle will cut from 3mm right up to 50mm of mild steel depending on the nozzle size used. 

What you get with this set; 
Black single cylinder trolley with disposable propane holder
FN LW Shank
FN LW Mixer 
FN LW Cutting Attachment
FN LW Propane Brazing Nozzle #1
FN LW Propane Brazing Nozzle #2
FN LW Propane Brazing Nozzle #3
FN LW Propane Brazing Nozzle #5
FN LW Propane Brazing Nozzle #7
FN LW Propane Brazing Nozzle #10
FN LW Propane Brazing Nozzle #13
FN LW Propane Brazing Nozzle #18
FN LW Propane Heating Nozzle #2
P/PYFN 0.8 
P/PYFN 1.2
Hoses for Oxygen and Propane (As per your selection) 
G3/8" BSP Oxygen Flashback Arrestor
G1/4" BSP Fuel Flashback Arrestor
0-4 Bar Oxygen Regulator
1" Inlet Propane Regulator with 1 Gauge 0-2 Bar
Disposable MAPP Gas Cylinder
Single Flint Spark Lighter

The only thing you need to add is a supply of Hobbyweld Oxygen from your local Hobbyweld stockist.