PNM-18 Hand Cutting Oxy / Propane All Sizes Available - Afrox Style
Original Afrox Style PNM-18 - Our PNM-18s cutting nozzles are produced to our own drawings and have the 3 Venturi inlet design which improves gas mixing and helps pull propane through, these cutting nozzles are manufactured to ensure we provide you with the highest quality PNMs available.
Our PNM-18 cutting nozzles have been designed to provide the correct flame characteristics plus a long working life, so, although our nozzles may be slightly more expensive initially, when compared with cheap copies, you will ultimately profit from a good quality cutting nozzle by not having to buy replacement tips as often as well as benefitting from the efficiency of process and less secondary finishing.
Why 18 splines? If you are looking for a more efficient pre-heat and cut then upgrade your PNM-9 to 18 you will never want to switch back.
With a seat type designed to fit our NM250 torches and an overall length of 72mm this nozzle is ideal as a general purpose hand cutting nozzle if you wish to cut with Oxy / Propane. Noz-Alls provide the full range of sizes which includes the 140 to 200mm size which many companies have dropped.
|
Nozzle
Size
(bar)
|
Nozzle
Size
(mm) |
Cutting
Thickness
(mm)
|
Propane
Pressure
(bar)
|
Oxygen
Pressure
(bar)
|
| 1/32 |
0.8 |
3-6 |
0.3 |
1.5-2.0 |
| 3/64 |
1.2 |
5-12 |
0.3 |
2.0-2.5 |
| 1/16 |
1.6 |
10-75 |
0.5 |
2.5-4.0 |
| 5/64 |
2.0 |
70-100 |
0.6 |
3.0-3.5 |
| 3/32 |
2.4 |
90-150 |
0.6 |
3.0-3.5 |
| 7/64 |
2.8 |
140-200 |
0.7 |
4.0-4.5 |
| 1/8 |
3.2 |
190-300 |
0.7 |
5.0-6.0 |
.png)
.jpg)
