TC180 Digital Prepared for Air Triple ADF PAPR Welding Mask Hood - 180 degree view and fully automatic true colour lenses

TC180D Prepared for Air Welding Mask ADF Details
This PAPR welding mask (Powered Air Purifying Respirator) has got to be one of the best value on the market, as you may already be aware at Noz-Alls we do try to provide you with the best that your spend can purchase and in this case this air fed TC180 – D welding mask is no exception.  What makes this so good is that it is founded on the brilliant 180 degree wide view of the TC180 true colour welding mask which features 3 ADF lenses – with this more advanced TC180D PAPR welding mask the controls are digital having improved and advanced features like gradual increase from dark to light, which reduces eye fatigue and eye strain plus fully automatic shade level control being adjusted to the correct shade level depending on the arc power, the shade changes by 0.1 of a shade level.  There is the possibility for you to set your own working preference from either -ve 2 shades to +ve 2 shades from the fully automatic shade again this may be set in variations of 0.1 shades which provides you with 40 different mid point settings from the mask automatic setting. 
ADF shades range from DIN #4 to DIN #14 automatically or manually set when you prefer.
The steady state of shade DIN 3 is generally light enough to work when fettling, grinding and completing positioning tasks plus of course the wide view means you are aware of your work area which increases your safety plus that of those around you, this ability means that you don’t need to lift and lower the welding mask repeatedly which improves comfort and results in you being more efficient.  Customers always remark on how clear the view is along with the width of the vision which is possible wearing the TC180D PAPR mask.
 
While wearing this TC180D PAPR welding mask it is really simple to switch from the automatic shade adjustment used for your welding to the “grinding” setting, there is a simple push button on the side of your welding mask.
Wearing your protective gauntlets simply depress the button and the mask enters the steady state shade #3, when you are ready to weld once more simply press the button again and you are back to welding mode which you pre-set or is fully automatic.
 
Main Features -  TC180 D PAPR Prepared for Air Welding Mask :-

• True colour ADF lenses x 3 off -  1 front and 2 side one either side.
• Main ADF Lens viewing area 115 wide x 85mm high
• Side ADF Lens 68 x 35 increasing to 68 x 80mm
• 180 degree wide view
• Lens optical quality graded as 1 / 1 / 1 / 1  - the very best possible
• 5 light sensors 
• Grind mode by touch button on side of mask
• Gradual return to light state to reduce eye fatigue
• Light state DIN #3 - No need to lift mask to work
• Shade control manual set between 4 to 14 or automatic - see below
• Automatic darkening depending on arc brightness  with personal preference adjustable -ve 2 shades to +ve 2 shades from auto level in 0.1 increments.
• ADF lens shades DIN#4 to DIN #8 plus DIN#8 to DIN #14 
• Side ADF panels Light state DIN #3 Dark state DIN #10
• Digital setting of welding mask parameters
• Sensitivity 0 - 7 or automatic
• TIG use down to 2 amps
• Superior comfort head band
• Twin filtered air feed to provide TH3 clean breathing air to mouth area - prevents dry eyes plus prevents cold forehead
• TC180Digital PAPR mask complete with feed pipes & seals = 1016 g

   The TC180D prepared for Air TH3 PAPR mask consists of:-

• TC180Digital with left and right air distribution nozzles
• Head top protection cover
• Inner head top seal
• Neck seal with draw cords and finger pinch cord clamps
• Superior comfort head band with inlet pipe support and clamp
• Left hand flexible air feed pipe
• Right hand flexible air feed pipe
• Left hand feed pipe spark proof cover
• Right hand feed pipe spark proof cover
• Tee joint for air feed pipes with bayonet fitting