Sliding Utility Clamp With Screw - UD45M-C3 - Strong Hand Tools

Video available - The video shows just how versatile these clamps are. If you would rather watch it without audio then there are subtitles. 

We sell these clamps because they are good quality, easy to use and I would use these clamps myself, they're not cheap but they are good value for money plus there is a wide range which we stock, so from small jobs to large heavy jobs these sliding clamps do the job well.  As the clamps go up in size there are different load capacities available to suit the clamping force you require.

The most versatile and economical sliding arm clamp in the industry. 
This clamp is one of the entry points into the Strong Hand Tools range. Once you use one of these clamps you will appreciate the quality of the build. The 4-in-1 range comes complete with fittings for the ability to perform regular clamping, over-step clamping (J-Clamp), spreading and pipe clamping. 

The sliding arm is easily removed to swap round. It can then be used as the spreader. 
The over-step extender can have other extenders screwed into it to give a larger range. 

Technical Information. 
114mm Capacity (4.5") - opening between jaws
83mm Throat (3.25") - Length of clamping arms before clamp hits the workpiece.
227kg Clamping Pressure (500 lbs) - typical load possible via clamping thread
16 x 8mm Rail Size (5/8 x 5/16") - Spine of clamp (light duty clamp).
M8 Tapped Hole - to fit the jaw adaptors as required.
0.6kg Weight 
 

114mm Capacity (4.5")
83mm Throat (3.25") 
227kg Clamping Pressure (500 lbs)
16 x 8mm Rail Size (5/8 x 5/16")
M8 Tapped Hole
0.6kg Weight 

Video content from Strong Hand Tools