Sliding Utility Clamp With Ratchet - UG125RM - Strong Hand Tools

We sell these clamps because they are good quality, easy to use and I would use these clamps myself, they're not cheap but they are good value for money plus there is a wide range which we stock, so from small jobs to large heavy jobs these sliding clamps do the job well.  As the clamps go up in size there are different load capacities available to suit the clamping force you require.

The sliding arm is easily removed to swap round. It can then be used as the spreader. 

The rapid release button is easy to use and perfect for undoing the clamp quickly also making life much easier over the traditional twist to tighten clamp range.

Technical Information. 
318mm Capacity (12.5") - opening between jaws
xxmm Throat (x") - Length of clamping arms before clamp hits the workpiece.
544kg Clamping Pressure (1200 lbs) - typical load possible via clamping thread
25 x 12mm Rail Size - Spine of clamp (medium duty clamp).
M10 Tapped Hole - to fit the jaw adaptors as required.
2.2kg Weight 
 

114mm Capacity (4.5")
83mm Throat (3.25") 
227kg Clamping Pressure (500 lbs)
16 x 8mm Rail Size (5/8 x 5/16")
M8 Tapped Hole
0.6kg Weight 

Video content from Strong Hand Tools