Tough 6.5 kVA Petrol Generator to Power the Most Demanding Welder
*Please allow 2-3 weeks for delivery*

When you need a generator to power a welder this Honda powered generator puts out 6.5kVA so is very capable giving you the ability to weld up to full power when you need to.
The Honda GX 390 single cylinder engine is coupled to a brushless NSM C100SG Alternator providing a - Smooth Waveform output.
To enable versatility the generator has 2 x 110V yellow sockets which includes 1 x 16A and 1 x 32A outputs as well as 2 x 240V blue sockets again with outputs of 1 x 16A  and 1 x 32 A so you may plug in what you need.

One option you may wish to consider is the electric start instead of the recoil "pull" starter.

Using a separate generator enables you to choose what type of welding process you wish to use, TIG, MIG or MMA, the following welders are PFC (power factor corrected) and allow full power to be used, however this generator would be operating at full power to provide the 200 amp power output - the PFC welders are "kinder" to the generator and the current draw required when compared to standard inverters.  Most inverters will be significantly better than a traditional transformer welder - many transformer welders are not "happy" operating from a generator.

If you need to weld at full power a lot of the time then switch to the higher output 10kVa generator.

Jasic JM200 PFC Compact MIG welder now available. 
Headux Titan 188 Compact MIG
Headux Titan 195 Semi-Synergic Compact MIG
Headux Titan 218 XP Pulsed Synergic MIG

Migatronic RallyMIG 161I Compact MIG

Jasic JA 200 PFC Stick welder
Jasic JA 180 PFC Stick welder
Headux 200 PFC Stick Welder
Migatronic Focus 161 Stick Welder
CWS Best MMA 160 Stick Welder
GCE ARC 160 stick welder Set
GCE ARC 200 Stick Welder Set

Migatronic Focus TIG 160 DC PFC
Migatronic Focus TIG 200 DC PFC
Jasic JT 180 PDV TIG DC
Jasic JT 200 PDV TIG DC
Headux 200 Pulsed DC TIG
CWS Best TIG 160 DC
CWS Best TIG 200 DC

Migatronic Focus TIG 200 AC DC PFC
Jasic JT 200A  TIG AC DC
Jasic JT 200D  TIG AC DC
Headux 200 Pulsed AC DC TIG
Headux 200 Pro Pulsed AC DC TIG

 

Fuel: Petrol 
Dimensions: 840mm Length, 575mm Width, 620mm Height
Weight: 110 kg
Ignition: Key Start
Air Cooled
Fuel Tank Capacity: 18 Ltrs
dBA @ 7m: 75
EU Stage V Emmisions 
Engine: Honda GX630 
Run time at 75% load: 5.5 Hours 
Make in UK