Direct Replacement 555 Torch For Your Kemper Gas Set - Also a replacement for the OxyTurbo Torch

This is the simple Kemper 555 small brazing and heating torch, the plastic barrel handle screws to the brass valve block.  The brass valve block has two inlet nipples to convey the gases to the control valves.  The brass valve block has an outlet connection to which the brass neck fits, the neck may be possitioned at any angle to suit the operation being undertaken.  The brass neck tube outlet thread allows the brazing nozzles to be screwed to the neck.
The inlet nipples are the small diameter to accept the 3,00 mm bore hoses which Kemper supply.

On this Kemper 555 torch the pre-heat valve knobs are metal rather than plastic which OxyTurbo use for their low cost torch.  The 555 control knobs are much less likely to be damaged being manufactured from metal.  This Kemper torch is a better replacement for your OxyTurbo 90 or 110 gas set torch than the torch supplied originally.  the kemper torch control knobs are smaller which means that they are a much more convenient size and don't get in the way.

• Overall Length  - blowpipe handle to nozzle tip              220 mm
• Valve adjusting knob diameter                                          12 mm
• Valve knob height                                                              9 mm
• Grip length                                                                       100 mm
• Torch weight                                                                   146 grams

Kemper code 504