Weldstar 350a Double Pulsed MIG Welder

A compact 3 phase welder with an excellent range of setups possible. We have the manual online for you to look at your own leisure so you don't just have to take our word for it. 
Available in 3 different forms each offers you the ability to change it as you see fit in the future too. The first is a standalone unit perfect for sitting on a work bench or on a custom made trolley of your own, the second is the same air cooled unit but mounted onto a trolley with a very useful storage box underneath the welder helping to keep everything tidy and in one place when not in use. The third option is the upgrade from air cooled to water cooled. At Noz-Alls, we try to make it as easy as possible for you to compare them all so we have listed each in the related products section below. 

Each machine comes with a 4 meter torch either the 36 type for the air cooled or the 501 for the water cooled. 

This welder can work in fully synergic mode to take the guess work out of setting up the machine but it can also be setup manually if required. You have the additional joys of being able to dial in pulse and double pulse settings to give you a cleaner, smarter welder with a significant reduction in spatter. This machine will actually save you money by reduced secondary operations. 

For the machine spec please see the 'Specification' tab and then the sales leaflet and user manual are under the downloads section. 

Rated input voltage	V	AC 400V ±15% 50/60Hz
Rated input power	kVA	MIG 7.8
		TIG 6.5
		MMA 8.6
Rated input current Imax	A	MIG 20.7
		TIG 17
		MMA 22.7
Rated input current Ief	A	MIG 11.3
		TIG 9.3
		MMA 12.4
Welding current range	A	MIG 20 ~ 350
		TIG 10 ~ 350
		MMA 10 ~ 350
No-load voltage	V	MIG 14V
		MMA 14V
		TIG 72V
Rated duty cycle (40°C)	%	MIG 350A @ 30%
		MMA 350A @ 30%
		TIG 350A @ 30%
Efficiency	%	85
Idle State Power	W	25
Power factor	cosφ	0.7
Standard		EN60974-1
Protection class	IP	IP23
Insulation class		H
Noise	db	<70
Humidity	%	<90% (20°C)
Operating temperature range	°C	-10 ~ +40
Storage temperature	°C	-25 ~ +55
MIG recommended wire size	mm	FE: 0.6/0.8/1.0 /1.2/1,6
		SS: 0.8/1.0/1.2
		Flux Cored 0.6/0.8/1.0/1.2
		Al: 1.0/1.2
Wire reel weight/spool size	Kg/mm	5kg / 200mm and 15kg / 300mm
MMA electrode size range	mm	1.6 ~ 6.0
Overall size	mm	Power source only: 680 X 250 X 485
		Power source, cooler and trolley: 1200 X 380 X 600
Weight	Kg	Power source only: 27.9
		Power source, cooler and trolley: 48.0