GCE Acetylene Side Entry Regulator - two gauge single stage reg for use on rent free acetylene or AP cylinders.
Top quality GCE acetylene regulator designed to fit side outlet cylinders so has the longer extended inlet stem required to ensure the outlet connection and FBA clear the cylinder top.
Standard industrial bull nose fitting with left hand nut for fitting to the gas bottle with the regulator gas outlet connection being the industry standard G3/8 BSP left hand.
Please make sure you use a flash back arrestor with your gas equipment set. If you require a FBA please see the related products section.
The flow rate from the regulator should be sufficient for most typical oxy / acetylene applications even when DA cylinders have to be connected together to be able to provide the gas flow required for the nozzle concerned.
DA regulator connected to single large industrial DA cylinder will provide flow for :-
- Lt. Wt. welding nozzles # 1 to #25
- Swaged type 5 welding nozzles #1 to #35
- ANM-6 cutting nozzles size 1/32 to 5/64"
- ANME-6 cutting nozzles size 1/32 to 5/64"
- AGNM #13 gouging nozzle
- AHT #25 heating nozzle
- Lt. Wt. Heating #1 to #3
- NM heating #1 to # 3
- Pin blowing nozzles #1 to #4
- Model "O" welding nozzles #1 to #5
There are many other nozzles styles which may be successfully operated on a single (industrial size) acetylene cylinder.
Coupling 2 or 3 cylinders together with the 3 way cylinder adaptor and flexible connections allows the use of:-
- Lt. Wt. welding nozzles # 1 to #25
- Swaged type 5 welding nozzles #45 to #90
- ANM-6 cutting nozzles size 7/64 to 1/8"
- ANME-6 cutting nozzles size 7/64 to 1/8"
- ANME-6 HD cutting nozzles size 7/64 to 1/8"
- ANME-10 HD cutting nozzles size 7/64 to 3/16"
- AGNM #19 & #25 gouging nozzle
- AHT #50 & #100 heating nozzles
- Lt. Wt. Heating #4
- NM heating #4 to # 6
- Pin blowing nozzles #5 to #7
- Model "O" welding nozzles #1 to #5
.png)
.jpg)
