Oxygen Hose 20m Long x 10mm bore with steel overbraid G3/8 x G3/8 RH fittings

Protected oxygen hose for use in arduous environments this 10mm bore hose has a higher flow than most being fitted with good quality right hand G3/8 fittings at each end, not fitting a HCV so as to eliminate the flow restriction and pressure drop experienced from a HCV being fitted, which can give rise to more safety problems. 
Please ensure good quality high flow flashback arrestors are fitted to the regulator outlet and of course that before lighting up the system is correctly purged.

The hose length is 20m, shorter lengths may be made to order.  
The hose has a steel overbraid for protection.  
To help identify the hose the steel overbraid has a coloured thread of blue to identify that the hose may be used with Oxygen.
Due to the higher flow required where these hoses are used plus to ensure safe gas flow for the processes involved a hose check valve (HCV) is not fitted.

Hoses are also available with a stainless steel over braid. 
Please enquire with Noz-Alls Tel 01242 681052.
All these type of wire protected hoses are generally made to order to suit customer specific requirements.