Fits the Oxyturbo M12 RH connection
Disposable Oxygen Canister For Welding & Brazing. 5% more contents than Oxyturbo 0.95ltr bottles.

Replacement for the Oxyturbo disposable welding gas canister is designed to fit to the Oxyturbo mini oxygen regulator with the right hand M12 connection thread.

The perfect cylinder for your Oxyturbo portable units. This M12 right hand thread is the specific thread form only used by Oxyturbo.
Rothenberger have exclusive use of M10 left hand oxygen canister connection and Oxyturbo did have exclusive use of M12 right hand but Kemper now produce this thread form also.
All other gas sets including our own at Noz-Alls, including sets from Perkeo, Kemper et cetera make use of the much more common M10 right hand. 

Note
These small sets generally get used with Propane or Propylene (MAP) because acetylene is not available in miniature cylinders.  Welding or fusion welding is not possible when burning propane or propylene because the flame is too oxidizing. 

The oxidizing flame consumes 3.7 to 4.0 volumes of oxygen so will quickly consume the oxygen in the disposable canister - Therefore always order more. 
The propane canister will probably last longer than 35 disposable oxygen canisters!

HobbyWeld rent free oxygen makes sense on our single cylinder trolley when it is possible to use this type of set up.

Canister height = 360mm to top of M12 RH thread.
Canister diameter = 71mm
Canister volume 1.0L  150g   5.3oz
Contents = 110 Litres of oxygen
Total weight 0.838kg

Our small M12 disposable oxygen canisters are filled to 110 bar  = 110 litres of oxygen.
Please be aware that some small canisters which look sinmilar are only filled to 60 bar with 57 litres of oxygen. Oxyturbo cylinders are smaller with sligthly less contents.

This is an order only item and returns cannot be accepted.